A few weeks ago I bought some more Elinchrom Ranger Quadra kit and after a short while lugging my gear around in multiple bags and cases I decided that it was time to get myself one big case to take most or all of my Quadra gear. My rationale was that I am pulling one bag on wheels and carrying two or three others so why not make it one on wheels with the lighting and one smaller bag with cameras and lenses riding on top of it or over my shoulder as required? There’s quite a bit of choice on the market but all of my experience with Think Tank bags told me to start my search there. They make lots of rolling bags but only three specifically designed to lug large amounts of kit. My benchmark was that I had to be able to get at least two of my Manfrotto 156 stands plus a couple of Manfrotto 001s in there along with two or three packs, three or four heads, spare batteries, cables, light modifiers and plenty of accessories.
I had previously seen a colleagues Location Manager 40 case and so I wanted to check out the Logistics Manager 30 because on paper it appeared to be just about perfect. The internal dimensions were listed at 70cm length. My 051 stands are 68cm when folded and so I tried one and when it fitted the deal was pretty much sealed. All I needed to do was make sure that it fitted into the boot (trunk) of the car and it was at this point that I realised that neither of the two bigger “Manager” series bags would have worked. The 30 goes in with a bit to spare but anything much longer would need to go sideways and therefore wouldn’t be much use.
In the ten days or so since buying the case I have only used it twice. On job number one I was delighted with it when rolling it but less so when having to lift it up stairs or into the boot (trunk) of the car. There’s no bag or case in the world that can magically make its contents weigh less and the temptation to load this one has to be tempered with my need to be able to lift it. For job two I went with just two packs, two spare batteries, three heads and only three stands and quickly realised that I could only fully load this case if I were working with someone else who could help with the lifting. I’m getting old!
I am happy to report that this case comes with so many options for the inserts and dividers that I have a medium sized carrier bag full of unused bits. The flexibility is amazing and the quality of the construction appears to be right up there with every other bit of Think Tank kit I own. I am particularly pleased with the zipped mesh compartments in the lid. I have lots of gels cut into manageable pieces and they fitted into one of them very well whilst the other swallowed lots of those small accessories that can otherwise get lost drifting around in the base of the bag. You can see that I have a couple of pouches in this case. One has the Elinchrom Skyport HS triggers and the other has lots of small and medium sized clips which are great for holding gels etc.
I’m sure that there’ll be a few tweaks and some settling in but, for now, this layout works very well for me when I am working on my own. I haven’t even thought about using any of the exterior pockets but I have already given the built-in combination lock a go – chaining my locked bag to a radiator after I’d finished shooting, packed up and whilst I’d gone for coffee with the client.
My final point here is that turning up with completely professional solutions is good for your image. I’m sure that a reasonable quality suitcase with some makeshift padding would work almost as well and cost £200 less but this really is doing the job properly and my client definitely noticed.